High Performance Mosaic Adhesive Film
Don't Wait Hours or Even Days for Your Glue to Dry
NO Days Mosaic Adhesive Film is a superior alternative to messy, weak and inconsistent liquid adhesive products delivered in a dry-to-the-touch thin film sheets. NO Days Mosaic Adhesive Film can then be placed down on a variety of substrates including wood, glass, particle board, drywall and medium density fiber board (MDF). Now with 20% more adhesive film! | New Product Size
| |
| Bond Glass or Tiles to Substrates in No Time Quick Curing | 48" x 12" sheets in 1, 2 and 5 sheet packs or 100ft x 12" Roll |
.
.
View more NO Days Mosaic Adhesive Film Demonstration Videos
.
 | A Few Easy Steps Simply place down your glass or tile pieces on top of the mosaic film and heat. Heat entire glass or tile patterns or sections at once and allow to briefly cool to cure. That is it! Your glass or tile pieces are now securely bonded to your substrate. Available Product Sizes:
|
 | Make Application Easier by Prepping Your Substrate Cut the adhesive to the size of your substrate (stepping stone, cement board, mdf, or wood) and place it on the clean, dirt-free surface that you will build your mosaic on. Place the release paper that comes in the package shiny side down on top of the adhesive, overlapping the edges to prevent running of the adhesive on to your craft iron. Press the paper with the iron on a medium setting until the adhesive turns transparent. Don't lift the release paper until the paper has cooled and the adhesive no longer sticks to it. You can now build your mosaic without the adhesive sheet slipping, and heat set your mosaic in sections without the adhesive pulling back. |
| See NO Days Mosaic Film in Action ------ >>> | ||
| Learn how to use NO Days Mosaic Adhesive Film by visiting our Video and Mosaic Gallery. You will learn:
|  |  |
Create Amazing Detail With NO Mess | Wanna Chit Chat About Streuter Tech Products? |
 | Then jump right in and join us on Facebook! Receive updates on new videos, projects and see some of the creative mosaics begin built with NO Days Mosaic Adhesive Film.
|
| Adds More Strength and Sealing Capabilities | |
| The uniform thickness of NO Days Mosaic Adhesive Film creates a strong long-term bond and seal between your glass/tiles and substrates. When heated, the adhesive film will begin to flow adjusting for any surface flatness conditions and voids that may exist. You can even stack a few sheets of film if you are working with extremely uneven surfaces or pourous surfaces. |  |
Re-Working after Curing with NO Days Mosaic is No Problem! A unique characteristic of NO Days Mosaic Adhesive Film is in it's ability to be easily re-worked unlike other traditional liquid or cement adhesives. Once you heat and cure NO Days Mosaic, it can be easily re-worked by simply re-heating. No more having to "break your bond" after curing and risk damaging your glass/tile or substrates you are working with in the process. NO Days Mosaic Adhesive Film cannot be re-activated by indoor or outdoor temperatures due to its elevated phase-change temperature of 160F/71C (point at which it is heated and turns from a solid to a liquid). |  |
| Grouting | |
There are no special grouts or grouting instructions required when using NO Days Mosaic Adhesive Film. The strong bond provided by the mosaic adhesive film prevents glass and tile movement when grouting. |  |
| Outdoor Application | |
| NO Days Mosaic Adhesive Film was designed with outdoor weather conditions in mind. The elevated phase-change temperature (point at which it is heated and changes from a solid to a liquid) is 160F/71C. This elevated phase-change temperature is high enough where it cannot be reactivated by outdoor weather conditions. But low enough to be quickly heated by a heating device when applied. |
| Trace Your Pattern (preserve your original pattern sheet) | |
| Trace your pattern directly onto your glue first! Simply lay down the mosaic film on top of your pattern and trace with a felt pen. The clear film form of the mosaic adhesive film allows you to see your pattern underneath. You can now take your mosaic film sheets and place them on top of your substrate. NO Days Mosaic Adhesive Film gives you the capability of working with your pattern without having to trace it onto your substrate first. If you prefer to trace your pattern onto your substrate first.....not a problem! The clear film form of NO Days Mosaic Adhesive will allow you to see you pattern underneath. When finished placing your glass or tile pieces, heat and allow to cool to cure. |
| Clarity | |
| Due to the mosaic adhesive film's thin film form, it can be used in applications where a designer is wanting to minimize the visual effects of adhesive when using clear glass or glass substrates. The amount of clarity with NO Days Mosaic Adhesive Film is dependent on the designers ability to apply uniform and even heat to activate the adhesive. If NO Days Mosaic Film is being used in glass to glass application where there will be no grouting, then the film can be easily cut to match each glass piece so the adhesive film will only be present underneath the cut glass piece and not within the area between the cut glass pieces typically where the grout would be applied. |
| Three Methods of Heating | |
| Heat Gun: use a heat gun to heat sections or your entire mosaic at once. Heat Guns are available at Streuter Technologies or can be found at your local hardware or hobby store. |  |
| NO Days Universal Curing Station (ideal for studios and manufacturers): quickly cure your entire mosaic or sections of your mosaic at once. Place curing station on top of glass or tiles. Heat will transfer through glass or tiles activating adhesive film. Remove curing station to allow to cool to fully cure. Available in multiple curing station sizes. Curing Station are available at Streuter Technologies. |  |
| Household Oven: Place your mosaic in your household oven for 10 minutes at approximately 220F. Heat will activate adhesive film. Remove from oven to allow adhesive to fully cure. |  |
| Setup: With all 3 methods, adhesive film must be placed in between glass/tiles and substrate base. | |
Note: heating times may vary depending on your heating tool, glass or tile thickness and total area of your mosaic. We recommend testing a small test piece first to familiarize yourself with the optimal heating technique and setup.
| Get to Your Grouting Quicker! | |
| NO Days Mosaic Adhesive Film's key advantage is in its ability to quickly cure large surface areas of a mosaic with no mess. Mosaic Artists can now eliminate the tedious task of having to glue each glass or tile piece and then wait hours or sometime days to cure before grouting. Whether you are bonding to either glass, metal, ceramic or plastics, NO Days Mosaic Adhesive Film ensures your mosaic will be built with ease held together with strength allowing others to enjoy your mosaic masterpieces for years to come. |
| Ordering | |
| All NO Days Mosaic Adhesive Film product sizes are available in multiple pack sizes or log rolls. For wholesale or special manufacturer options, contact toll free 1-888-989-3832 or e-mail This e-mail address is being protected from spambots. You need JavaScript enabled to view it |
© 2005-2010 Streuter Technologies, Inc.
Road Show & Trade Show Events
Mosaics Menu
Other Products
Newsletter Sign Up
Sign up to receive our monthly craft or glass e-mail newsletters. Stay up to date with new products, offers and news from Streuter Tech
Glass Project Updates
¤ Featured Artisit Profiles ¤
Each month, we select an artist to feature on our website and in our newsletter. We invite those artists working with No Days, GlueFilm, GlueFoil or anyone of our products to share their creations.
