Light Tack Liquid Adhesive for Glass Fusing (Frit)
 Frit It! Foil It! FIRE IT! Light Tack Bond for Adding Light Weight Accents to Glass Before Fusing "Frit Painting - A Leaf Plate" with NO Days Liquid Burns off in a Kiln with NO RESIDUE! Available in 4oz (118ml) and 8oz (236ml) Bottles |  NEW: Every Bottle Now Includes the Ultra Fine Tip Needle Dispenser and Foam Brush |
.
.
View more NO Days Liquid Fusing Demonstration Videos
.
|  |
See NO Days Liquid in Action! ----->>> | |||
Vist our Video and Project Gallery and Learn:
|  |  | |
Create Detailed Frit Designs | Wanna Chit Chat About Streuter Tech Products? |
 | Then jump right in and join us on Facebook! Receive updates on new videos, projects and see some of the creative and innovative tasks being done with NO Days Liquid.
|
| Design a Frit Pattern that Actually Holds | |
Simply pour the adhesive into the Frit first. Shape your Frit into your desired shape and allow 10 to 15 minutes to cure. 3 Hours recommended for a full cure. The Frit will begin to harden and secure to your glass surface. If you require taller amounts of frit, simply lay down more adhesive mixed frit on top of your existing frit line for thicker stacks. Place your design in a kiln. The adhesive will hold the frit in place and burn off with no residue! Easy to Re-Work: Re-working cured sections of Frit is easy with NO Days Liquid Fusing Adhesive. Simply apply more adhesive to the cured section. The additional amounts of NO Days Liquid Fusing Adhesive will soften the already cured frit and allow you to re-work. It is just that easy! Note: NO Days Liquid Adhesive can be fired before fully cured. However, ventilation in a kiln is then recommended when firing. |  |
| Adding Leafing, Foil or Lightly Tacking Glass Layers | Get out the Foam Brush (included with each bottle) |
 | Adding Foil and Leafing Apply liquid adhesive to glass surface. With foam brush, spread adhesive evenly. Apply foil or leafing to surface of the glass where adhesive was applied. Allow 10 to 15 minutes to cure. 3 hours recommended for a full cure. When fired in a kiln, the adhesive will burn off with no residue. Lightly Tacking Glass Layers Apply liquid adhesive to bottom glass surface. With foam brush, spread adhesive evenly throughout glass surface. Gently apply top layer of glass to adhesive coating on bottom layer of glass. Allow 10 to 15 minutes to cure. 3 hours recommended for a full cure. When fired in a kiln, the adhesive will burn off with no residue. Note: NO Days Liquid Adhesive can be fired before fully cured. However, ventilation in a kiln is then recommended when firing. After use, cured adhesive may begin to harden foam brush. Cleaning the foam brush is simple by soaking in NO Days Liquid Adhesive. Liquid adhesive will re-activate cured adhesive on foam brush. |
Need a higher strength adhesive to secure glass to glass stackups? Then review our NO Days Glass Fusing Adhesive Squares. These heat activated squares will hold your glass setup securely when working, transporting or firing in a kiln. Squares for strength and liquid for delicates.
Don't Let Your Adhesive Get in the Way of Creativity! | Create Simple or Detailed Frit Designs | Ultra Fine Tip Applicator included with every 4oz and 8oz bottle for fine precision of adhesive onto your surface |
With NO Days Liquid Fusing Adhesive's light tack and easy to work with style, it is your preferred product for adding frit, foil or leafing to your glass surface. At the same time, designed burn off when fired leaving behind no residue. Don't let other liquid adhesives hold you back! Let your glass art creativity flourish with NO Days Liquid Fusing Adhesive. Clean Up is Easy! If you get adhesive on your hands while working, simply rub them with vegetable oil, then wash with soap and water. |  |  |
| Ordering | |
NO Days Liquid Fusing Adhesive is availabe in 4oz (118ml) or 8oz (236ml) product sizes. For wholesale or special manufacturer options, contact toll free 1-888-989-3832 or e-mail This e-mail address is being protected from spambots. You need JavaScript enabled to view it CLICK HERE to review our NO Days Firing Schedule General Recommendations |
© 2005-2010 Streuter Technologies, Inc.
Road Show & Trade Show Events
Glass Fusing Menu
Other Products
Newsletter Sign Up
Sign up to receive our monthly craft or glass e-mail newsletters. Stay up to date with new products, offers and news from Streuter Tech
Glass Project Updates
¤ Featured Artisit Profiles ¤
Each month, we select an artist to feature on our website and in our newsletter. We invite those artists working with No Days, GlueFilm, GlueFoil or anyone of our products to share their creations.
