Bonding Glass or Tiles to Mesh Has Never Been So Easy!
Available in 48" x 12" (122cm x 30.5cm) Sheets
50ft or 100ft Rolls
All pack sizes include white paper release liner to place underneath when heating
NO Days Mosaic Mesh is a unique fiberglass mesh matrix coated with our proprietary NO Days Mosaic Adhesive specifically designed to provide professionals and hobbyists more flexibility with the design of their glass or tiles as well as allow them the capability of transporting their mosaics without worry of piece movement.
Heat it..Grout it..Mount it
Get to Your Final Design Quicker with NO Days!
Save Cure Time and Add Strength
Simply lay down your glass or tiles on top of the dry-to-the-touch mosaic mesh surface. Heat glass or tiles using a standard heat gun or NO Days Universal Curing Station and allow to briefly cool to fully cure. Thats It! Your glass or tiles are now bonded to the mesh substrate and can be immediately grouted, transported or mounted vertically.
Create Large Mosaics that Can Be Transported & Mounted Vertically
Wanna Chit Chat About Streuter Tech Products?
Then jump right in and join us on Facebook! Receive updates on new videos, projects and see some of the creative mosaics begin built with NO Days Mosaic Mesh.
NO Days Mosaic Mesh General Overview
Trace Your Pattern
Trace your pattern using a felt tip pen directly onto the mesh. You can view your pattern through the mesh.
Place Your Glass or Tiles
Apply Heat (see heating methods below)
Allow to Cool to Cure
Transport or Mount
|Three Methods of Heating|
|Heat Gun: use a heat gun to heat sections or your entire mosaic at once. Heat Guns are available at Streuter Technologies or can be found at your local hardware or hobby store.|
|NO Days Universal Curing Station (ideal for studios and manufacturers): quickly cure your entire mosaic or sections of your mosaic at once. Place curing station on top of glass or tiles. Heat will transfer through glass or tiles activating adhesive coated mesh. Remove curing station to allow to cool to fully cure. Available in multiple curing station sizes. Curing Station are available at Streuter Technologies.|
|Household Oven: Place your mosaic in your household oven for 10 minutes at approximately 220F. Heat will activate adhesive coated mesh. Remove from oven to allow adhesive to fully cure.|
|Setup: With all 3 methods, place silicone paper release liner underneath to prevent adhesive from bonding to your work surface when curing. Silicone release liner is included with each pack of NO Days Mosaic Mesh. The mesh and silicone release paper is non-directional and either side can be used. The silicone release liner can be used multiple times and still provide an easy release.|
Note: heating times may vary depending on your heating tool, glass or tile thickness and total area of your mosaic. We recommend testing a small test piece first to familiarize yourself with the optimal heating technique and setup.
|Mounting Your Mesh Mosaic (open cell design)|
NO Days Mosaic Mesh is manufactured with an open cell design. This means that the NO Days Mosaic Adhesive is only coated onto the fiberglass matrix itself leaving the cell of the fiberglass matrix open. The open cell design of NO Days Mosaic Mesh will allow common bonding products to attached to the mesh, glass or tiles assisting in the bond when mounting the entire mosaic vertically or horizontally.
NO Days Mosaic Mesh can be easily mounted to a variety of indoor or outdoor surfaces using existing bonding products. Once your glass or tile mosaic is bonded to the mesh substrate, mount your mosaic horizontally or vertically using ThinSet, Pre-Mixed Mortar, Cement or Mastic.
Re-Working after Curing with NO Days Mosaic is No Problem!
A unique characteristic of NO Days Mosaic Mesh is in it's ability to be easily re-worked unlike other tradtional liquid or cement adhesives. Once you heat and cure glass or tiles to the mesh, it can be easily re-worked by simply re-heating. No more having to "break your bond" after curing and risk damaging your glass/tile or substrates you are working with in the process. NO Days Mosaic Mesh cannot be re-activated by indoor or outdoor temperatures due to its elevated phase-change temperature of 160F/71C (point at which it is heated and turns from a solid to a liquid).
There is no special grouts or grouting instructions required when using NO Days Mosaic Mesh. The strong bond provided by the adhesive coated mesh prevents glass and tile movement when grouting.
|NO Days Mosaic Mesh was designed with outdoor weather conditions in mind. The elevated phase-change temperature (point at which it is heated and changes from a solid to a liquid) is 160F/71C. This elevated phase-change temperature is high enough where it cannot be reactivated by outdoor weather conditions. But low enough to be quickly heated by a heating device when applied.|
|Simplify Your Process with NO Days Mosaic Mesh|
NO Days Mosaic Mesh is designed to simplify the process of building large or small scale mosaics by providing you a quick cure solution to mesh at the same time providing easy re-work of glass or tiles if necessary. Cure large sections, small sections or entire mosaics all at once securing your design to the mosaic mesh substrate. Your mosaic bonded to the mesh substrate can be easily transported or mounted vertically / horizontally with ease.
NO Days Mosaic Mesh is the ideal solution for commercial designers and hobbyists alike packaging strength, ease-of-use, no mess and flexibility all wrapped up one powerful and convenient product.
© 2005-2010 Streuter Technologies, Inc.
В полумраке они увидели, как всадник повернул коня и поскакал прочь из ущелья.
Я бы хотел, чтобы вы занялись этим "Скачать картинки с именами алина"делом.
Это возможно, согласился Роберт.
Видно было, что оба пловца "Скачать песню дима колдуна"изнемогают от усталости.
Матрос сам не раз был свидетелем таких случаев.
97 он поступил в другой "План воспитательной работы 10 класс"госпиталь.
По соглашению с агентом "Скачать игру злые птицы на телефон бесплатно"вожди-изменники вышли из форта Брук в сопровождении избранной свиты.
Road Show & Trade Show Events
Newsletter Sign Up
Sign up to receive our monthly craft or glass e-mail newsletters. Stay up to date with new products, offers and news from Streuter Tech
Glass Project Updates
¤ Featured Artisit Profiles ¤
Each month, we select an artist to feature on our website and in our newsletter. We invite those artists working with No Days, GlueFilm, GlueFoil or anyone of our products to share their creations.